View LG-5630WK-1-T60-C-D711_8579133.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet ! ligitek electronics co.,ltd. property of ligitek only LG-5630WK-1-T60-C-D711 0.2w power light led doc. no : qw0905-LG-5630WK-1-T60-C-D711 rev. : b date : 06 - aug. - 2012 pb lead-free parts l dcc
1/15 page ! ligitek electronics co.,ltd. property of ligitek only product model designation system t60 - 56 1 wk 30 lg 30:3.0mm 57:5.7mm lg:ligitek 56:5.6mm dimension(w) x1 dimension(l) title emitting color wk:white color x1 x2 x3 x4 x5 x6 x7 x8 x9 - d7 11 - chip modification -x: 2 chip in 1(parallel) -1: 1 chip in 1 -2: 2 chip in 1(series) chromaticity coordinates x2 x3 x4 x5 x6 x7 x8 - -c: cool white -n: neutral white -w: warm white bin modification x9 c - test conditions t60: @60ma color rendering index -d7: cri>70 -d8: cri>80
! ligitek electronics co.,ltd. property of ligitek only 2/15 *. cove / undershelf / task lighting. *. traffic signaling / beacons / rail crossing and wayside lighting. *. more energy efficient than lncandescent and most halogen lamps. *.suitable for all smt assembly and soldering methodes *. rohs compliant *. pb-free reflow soldering application *. white colored smtpackage features *. commercial and residential architectural lighting. *. portable(flashlight,bicycle). *. automotive exterior (st op-tail-tum,chmsl,mirror side repeat). *. backlights(monitor,tv) / light guides. *. reading light (car,bus,aircraft) typical applications *. mini-accent / uplighters / downlighters / orientation lighting *. fiber optic alternative / deco rative / entertainment lighting. *. security / garden lighting. page dimension c anode(+) 3.0 2.3 0.3 1.6 2.1 0.8 0.5 1.62 0.5 1.28 0.8 6.8 3.8 0.9 5.6 2.0 recommended solder patterns 5.3 note: 3 1.the tolerance unless mentioned is 0.1mm,unit=mm. 2.it is strongly recommended to apply on electrically isolated heat conducting film between the slug and contact surfaces. a c cathode(-) slug
note : 1. white emitters are built with ingan. 2. luminous intensity is measured with an accuracy of 10% absolute maximum ratings at ta=25 : led junction temperature tj peak pulse current 3 duty 1/10@10khz power dissipation 3 dc forward current pd i fp i f parameter symbol unit ma w : ma white ratings ! ligitek electronics co.,ltd. property of ligitek only page 3/15 reverse current(vr=5v) storage temperature operating temperature ir tstg t opr a : : soldering temperature 3 t p 3 esd sensitivity 3 v b v note: 1.proper current derating must be observed to maintain temperature below the maximum. 2.leds are not designed to be driven in reverse bias. : -40 ~ +100 260 -40 ~ +85 5 00 10 0.2 125 1 00 60 luminous intensity characteristics at 60ma 3 3 (ratings at 25c ambient) ---- white luminous intensity emission color min. max. part no LG-5630WK-1-T60-C-D711 typ. lm units 18 19
4/15 page ! ligitek electronics co.,ltd. property of ligitek only 4/15 page forward voltage characteristics at 60ma (ratings at 25c ambient) vf min. note : forward voltage is measured with an accuracy of0.1v white emission color v 3.6 ---- max. typ. units chromaticity coordinates characteristics at 60ma (ratings at 25c ambient ) lambertian emission angle characteristics at 60ma (ratings at 25c ambient ) white emission color units degrees 120 part no LG-5630WK-1-T60-C-D711 part no 2.8 cri color rendering index characteristics at 60ma (ratings at 25c ambient ) white emission color ---- part no min. max. typ. 70 ---- LG-5630WK-1-T60-C-D711 LG-5630WK-1-T60-C-D711 0.3616 emission color part no. white 0.3028 0.3376 0.3113 x min. max. chromaticity coordinates y min. max. note : chromaticity coordinates is measured with an accuracy of0.01. LG-5630WK-1-T60-C-D711
5/15 page ! ligitek electronics co.,ltd. property of ligitek only bin code description 2.9-3.0 3.1-3.2 3.0-3.1 luminous int ensity (lm) @if=60ma bin code max. min. forward voltage(v) @if=60ma color rank @if=60ma 2.8-2.9 bin code f18d luminous intensity 3.0-3.1 65k-1 forward voltage cie f22d f20d 20 22 f18d 18 f24d 26 24 20 22 24 3.3-3.4 3.2-3.3 3.4-3.5 3.5-3.6 57k-1 57k-2 65k-1 65k-2 65k-3 65k-4 57k-3 57k-4
6/15 page bins code of chromaticity coordinates ! ligitek electronics co.,ltd. property of ligitek only note: tolerance on each color bin(x,y)is0.01 xyxyxyxy 57k-1 0.3376 0.3616 0.3292 0.3539 0.3293 0.3423 0.3371 0.3493 57k-2 0.3371 0.3493 0.3293 0.3423 0.3294 0.3306 0.3366 0.3369 57k-3 0.3292 0.3539 0.3207 0.3462 0.3215 0.3353 0.3293 0.3423 57k-4 0.3293 0.3423 0.3215 0.3353 0.3222 0.3243 0.3294 0.3306 65k-1 0.3205 0.3481 0.3117 0.3393 0.3131 0.3290 0.3213 0.3371 65k-2 0.3213 0.3371 0.3131 0.3290 0.3145 0.3187 0.3221 0.3261 65k-3 0.3117 0.3393 0.3028 0.3304 0.3048 0.3209 0.3131 0.3290 65k-4 0.3131 0.3290 0.3048 0.3209 0.3068 0.3113 0.3145 0.3187 cct(k) reference range bin code 6500-7040 5310-5700 5700-6020 6020-6500 234 1
7/15 page ! ligitek electronics co.,ltd. property of ligitek only the c.i.e 1931 chromaticity coordinates 0.30 0.32 0.34 0.36 0.38 0.30 0.32 0.34 0.36 57k-1 57k- 2 57k- 4 57k- 3 65k-1 65k- 2 65k- 4 65k- 3 5700 6500 7040 5310 6020
! ligitek electronics co.,ltd. property of ligitek only page 8/15 recommended profile for reflow soldering pb -free solder temperature profile 120 sec. max. 60 sec.max. above220c 1-5c/sec. 1-5c/sec. 6c/sec. 260c.max. 10 sec .max. pre-heating 180-200c 180-200c 10 sec max 260c max 120 sec max pb -free solder temperature profile pre-heat pre-heat time peak-temperature soldering time condition (1) reflow soldering should not be done more than two times. (2) when soldering,do not put stress on the leds during heating. (3) after soldering,do not warp the circuit board. (4) the encapsulated material of the leds is silicone. precautions should be taken to avoid the strong pressure on the encapsulated part. so when using the chip mounter,the picking up nozzle that does not affect the silicone resin should be used. hand soldering conditions: do not exceed 3 seconds at maximum 320c under soldering iron.(one time only)
9/15 page ! ligitek electronics co.,ltd. property of ligitek only fig.1 forward current vs. forward voltage f o r w a r d c u r r e n t( m a ) forward voltage(v) fig.2 forward current vs.luminous intensity relative luminous intensity(%) f o r w a r d c u r r e n t( m a )
10/15 page ! ligitek electronics co.,ltd. property of ligitek only fig.4 directivity radiation -30 c 75% 100% -60 c 100% 50% 75% 25% 0 50% 25% 0 c 60 c 30 c fig.3 luminous spectrum(ta=25 c c) relative luminous flux(%) wavelength (nm) spectral radiance
carrier type dimensions note : the tolerances unless mentioned is d 0.2mm. label packing specifications polarity + - aluminum moist-proof bag label ! ligitek electronics co.,ltd. property of ligitek only desiccant 11/15 page 12.00.3 1.5 1.75 4.0 5.95 9.3 4.0 1.2 3.25 5.5 0.25
16.0 d 1.0 reel dimensions label explanation ! ligitek electronics co.,ltd. property of ligitek only 13.5 60.20.5 1781 12/15 page ! wg;4/1.4/2 pb !qbsu!; !mpu!; !ruz)qdt*; !cjo0ivf!; ! ht2.17121: !2111 ! g29e076l.2 ! mh.6741xl.2.u71.d.e822 vf : forward voltage (cie_x , cie_y) hue : chromaticity coordinates bin : luminous flux ligitek electronics co., ltd.
3. 10 inner boxes / carton 4. carton size : l x w x h 58cm x 34cm x 35cm 1. 4 bag / inner box 2. inner box size : l x w x h 23cm x 8.5cm x 26cm box explanation ! ligitek electronics co.,ltd. property of ligitek only 13/15 page w l h l h w
page 14/15 ! ligitek electronics co.,ltd. property of ligitek only (1)test items and results reliability test: 1.ir-reflow in-board, 2 times 1.ir-reflow in-board,2 times 1.ta=under room temperature as per data sheet maximum rating. 2.if=60ma 3.t=1000 hrs test condition : thermal shock test -40 : 5 (2)criteria for judging the damage environmental test temperature cycling reflow soldering test 1 cyeles 25 0 30mins ~ : 2.10 1.105 5mins 30mins ~ - :: 40 1.t.sol=260 :d 5 : 2.dwell time= 10max. min) ( cycles 3.total 30 ( 100 min) 30 endurance test classification high temperature high humidity storage test low temperature storage test %~95 hrs : : 500 3.rh=90 8 2.ta=105 4.t= 2.ta= 5 % 2hrs & : 5 : 5 1.ta=-40 :2 5 : 2.t=1000 hrs operating life test high temperature storage test test item hrs : 500 1.ta=105 2.t= : 5 22 22 22 22 22 22 22 sample size criteria for judgement luminous intensity reverse current forward voltage vr=5v if=60ma if=60ma test conditions vf iv ir item symbol - l.s.l x 0.5 - min. u.s.l x1.2 - u.s.l x2.0 max.
precautions for use: storage time: 1.the operation of temperatures and rh are : 5 : ~35 : ,rh60%. 2.once the package is opened, the products should be used within a week. otherwise, they should be kept in a damp proof box with descanting agent. considering the tape life, we suggest our customers to use our products within a year(from production date). 3.if opened more than one week in an atmosphere 5 : ~ 35 : ,rh60%, they should be treated at 60 : 5 : for 15hrs. cleaning: use alcohol-based cleaning solvents such as isopropyl alcohol to clean the led. esd(electrostatic disc harge): static electricity or power surge will damage the led. use of a conductive wrist band or anti-electrosatic glove is recommended when handing these led. all devices, equipment and machinery must be properly grounded. (a) recommended circuit. (b) the difference of brightness between led could be found due to the vf-if characteristics of led. drive method: led is a current operated device, and therefore, requirer some kind of current limiting incorporated into the driver circuit. this current limiting typically takes the form of a current limiting resistor placed in series with the led. consider worst case voltage variations than could occur across the current limiting resistor. the forward current should not be allowed to change by more than 40% of its desired value. circuit model b circuit model a led led ! ligitek electronics co.,ltd. property of ligitek only 15/15 page

▲Up To Search▲

Price & Availability of LG-5630WK-1-T60-C-D711

	To Download LG-5630WK-1-T60-C-D711 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .